InstrumentOfficial instrument text
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105
CIVIL AVIATION SAFETY AUTHORITY
SCHEDULE OF AIRWORTHINESS DIRECTIVES
Page 1 of 1
AIRWORTHINESS DIRECTIVE
For the reasons set out in the background section, the CASA delegate whose signature appears below revokes Airworthiness Directive (AD) AD/B747/232 and
issues the following AD under subregulation 39.1 (1) of CAR 1998. The AD requires that the action set out in the requirement section (being action that the delegate
considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the
circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in
the compliance section.
Boeing 747 Series Aeroplanes
AD/B747/232
Amdt 1
Crew Rest Area Heat Exchanger - 2 13/2001
Applicability: Model 747-400 series aircraft, line numbers 1 through 1205; equipped with dual
crown skin heat exchangers.
Requirement: Inspect in accordance with the technical requirements of FAA AD 2001-18-04 Amdt
39-12430.
Boeing Alert Service Bulletins 747-21A2412 and 747-21A2412 Revision 2
refer.
Compliance: As specified in the Requirement document with a revised effective date of 27
December 2001.
This amendment becomes effective on 27 December 2001.
Background: The FAA received reports of cracking and buckling of the front edge of the crew rest
heat exchanger on several aircraft. Investigation revealed that certain heat exchangers
were manufactured with material that is too thin. On one aircraft, the heat exchanger
buckled and bulged enough to make contact with the rudder and elevator cables
located below the heat exchanger.
Amendment 1 is issued in response to a new FAA AD which adds a new requirement
for a one-time inspection to determine the part number and shop code of the shell of
the crew rest heat exchanger, and follow-on actions if necessary, which terminate the
currently required repetitive inspections.
The original issue of this Airworthiness Directive became effective on 10 August
2000.
David Alan Villiers
Delegate of the Civil Aviation Safety Authority
8 November 2001
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105
CIVIL AVIATION SAFETY AUTHORITY
SCHEDULE OF AIRWORTHINESS DIRECTIVES
Page 2 of _____
The above AD is notified in the Commonwealth of Australia Gazette on 5 December 2001.