Requirement
Requirement Requirement
1. Revise the AFM by adding the following:
“BEFORE TAKEOFF"
Perform a magneto check of each engine at 1,700 RPM as follows: Move ignition switch first to R position and note RPM. Next, move switch back to BOTH, to clear the other set of plugs. Then, move switch to the L position, note RPM and return the switch to the BOTH position. RPM drop should not exceed 150 RPM on either magneto or show greater than 50 RPM differential between magnetos. If there is doubt concerning operation of the ignition system, RPM checks at higher engine speed will usually confirm whether a deficiency exists.
If the magneto check exceeds either of the above limits, both magnetos must be disassembled and inspected in accordance with requirement 2 of AD/CESSNA 210/62; an entry to this affect is to be made in the maintenance release by the pilot.
Sign in to see bill, explanatory material, and regulations and instruments
The statute text is free to read above. View subscription options to unlock the case-law research tools for each provision.