Specified electrical equipment
107 Specified electrical equipment
A person conducting a business or undertaking must ensure that specified electrical equipment of the person at the workplace is not used to perform work unless—
it is inspected and tested by a competent person—
if the equipment is double insulated—at least once every year; or
if the equipment is not double insulated—at least once every 6 months; and
either—
if the specified electrical equipment is connected to a socket-outlet that is in a permanent workplace under the control of the person conducting the business or undertaking—the specified electrical equipment is connected to a socket-outlet for which a type 1 safety switch, or type 2 safety switch, that is not portable, is installed; or
if the specified electrical equipment is connected to a socket-outlet that is not in a permanent workplace under the control of the person conducting the business or undertaking—the specified electrical equipment is connected to a type 1 safety switch or type 2 safety switch.Example of a workplace that is not under the control of the person conducting a business or undertaking at the workplace—
the premises of a customer of the person conducting a business or undertaking visited by a service technician carrying out work for the person conducting a business or undertaking
Examples of specified electrical equipment used to perform manufacturing work—
• a hand held grinder plugged into a socket-outlet
• a hand held electric drill plugged into a socket-outlet that is used for drilling holes in steelwork in a light engineering workshop
However—
subsection (1)(b)(i) does not apply if the person conducting the business or undertaking is exempted under section 109; and
subsection (1)(b)(i) and (ii) do not apply to a socket-outlet that is—
more than 2.3m above the floor; and
provided for the purpose of supplying electricity to a luminaire or to electrical equipment with a power rating of not more than 150W.
If after inspecting and testing the electrical equipment under subsection (1)(a), a competent person decides the equipment is safe to use, the person conducting the business or undertaking must ensure the competent person immediately attaches a durable tag to the equipment that shows the prescribed details for the equipment.
If after inspecting and testing the electrical equipment under subsection (1)(a), a competent person decides the equipment is not safe to use, the person conducting the business or undertaking must ensure—
the competent person immediately attaches a durable tag to the equipment that warns people not to use the equipment; and
the equipment is immediately withdrawn from use.
A person conducting a business or undertaking must ensure that, for the purposes of the business or undertaking, a tag is not attached to specified electrical equipment under subsection (3) unless—
the equipment is new; or
both of the following apply—
the equipment has been inspected and tested by a competent person;
the tag was attached by the competent person.
Note for subsections (1) to (5)—
ES Act—section 30 (see section 8)
The statute text is free to read above. View subscription options to unlock the case-law research tools for each provision.