Compliance indicator—type B gas appliance—Act, s 25
18GA Compliance indicator—type B gas appliance—Act, s 25
A compliance indicator for a type B gas appliance must be of durable material and be legibly and permanently marked with the following information:
a description of the appliance;
the name and licence number of the gas appliance worker or gasfitter who connects the appliance to the consumer piping system;
the name of the commissioning agent;
the name and licence number of the gas appliance worker who carried out the commissioning;
the date of approval;
the approval number;
the following information expressed in kPa:
the designed inlet pressure;
the maximum inlet pressure;
the outlet pressure;
the over pressure protection limit;
the over pressure set point;
the high gas pressure switch (HGPS) setting.
Note 1 If a compliance indicator is approved under s 19A (Approved compliance indicator) for this section, the approved indicator must be used.
Note 2 There is a penalty for attaching a compliance indicator to an appliance that is not approved (see Act, s 26 (2)).
Note 3 There is a penalty for attaching to an appliance anything that falsely purports to be a compliance indicator (see Act, s 26 (3)).
The statute text is free to read above. View subscription options to unlock the case-law research tools for each provision.