Barrister AI
All legislation
QLDRegulation
In force
This is the latest official compilation.Check the official source →
Part 3

Axle Mass Deduction Table

In force
Schedule 1General mass limits

Part 3 Axle Mass Deduction Table

Table—Axle mass deduction
Description of axle groupMass deduction (t)
Tandem axle group
Tandem axle group fitted with single tyres with section widths of—
(a)less than 375mm0.5
(b)at least 375mm but less than 450mm0.5
(c)at least 450mm0.5
Tandem axle group fitted with single tyres on 1 axle and dual tyres on the other axle on a motor vehicle other than a bus0.5
Tandem axle group fitted with dual tyres on a vehicle other than a pig trailer0.5
Tri-axle groups
Tri-axle group on a vehicle fitted with—(a)single tyres with section widths of less than 375mm on all axles; or(b)single tyres with section widths of less than 375mm on some axles and dual tyres on the other axles0.5
Tri-axle group on a vehicle other than a pig trailer fitted with—(a)single tyres with section widths of at least 375mm on all axles; or(b)dual tyres on all axles; or(c)single tyres with section widths of at least 375mm on some axles and dual tyres on the other axles1.0
Quad-axle groups
Quad-axle group fitted with single tyres with section widths of less than 375mm0.5
Quad-axle group fitted with single tyres with section widths of at least 375mm or dual tyres1.0
Axle groups of 5 or more
Rear group of 5 or more axles on a low loader fitted with single tyres with section widths of less than 375mm0.5
Any other rear group of 5 or more axles on a low loader1.0

sch 1 pt 3 ins 2026 SL No. 100 s 55

Research tools for this sectionPro

The statute text is free to read above. View Pro plans to unlock the case-law research tools for each provision.