Explanatory details
Endnote 3 Explanatory details
The Competent Authorities Panel Rules made by the National Transport Commission, on 13 June 2008 and with amendments endorsed by the Transport and Infrastructure Council on 18 May 2018. ↑
Reg. 246(1): S.R. No. 37/2011. Reprint No. 1 as at 12 May 2016. Reprinted to S.R. No. 91/2015. Subsequently amended by
S.R. Nos 90/2016, 2/2017 and 22/2017. ↑Reg. 247(1): S.R. No. 132/2012 as amended by S.R. Nos 56/2014, 91/2015 and 22/2017.
——
Fee Units
These Regulations provide for fees by reference to fee units within the meaning of the Monetary Units Act 2004.
The amount of the fee is to be calculated, in accordance with section 7 of that Act, by multiplying the number of fee units applicable by the value of a fee unit.
The value of a fee unit for the financial year commencing 1 July 2023 is $15.90. The amount of the calculated fee may be rounded to the nearest 10 cents.
The value of a fee unit for future financial years is to be fixed by the Treasurer under section 5 of the Monetary Units Act 2004. The value of a fee unit for a financial year must be published in the Government Gazette and a Victorian newspaper before 1 June in the preceding financial year.
Penalty Units
These Regulations provide for penalties by reference to penalty units within the meaning of section 110 of the Sentencing Act 1991. The amount of the penalty is to be calculated, in accordance with section 7 of the Monetary Units Act 2004, by multiplying the number of penalty units applicable by the value of a penalty unit.
The value of a penalty unit for the financial year commencing 1 July 2023 is $192.31. The amount of the calculated penalty may be rounded to the nearest dollar.
The value of a penalty unit for future financial years is to be fixed by the Treasurer under section 5 of the Monetary Units Act 2004. The value of a penalty unit for a financial year must be published in the Government Gazette and a Victorian newspaper before 1 June in the preceding financial year.
——
Table of Applied, Adopted or Incorporated Matter
The following table of applied, adopted or incorporated matter was included in S.R. No. 155/2018 in accordance with the requirements of regulation 5 of the Subordinate Legislation Regulations 2014.
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Regulations 1(c), 5 (definitions of Dangerous Goods List, foreign approved, outer packaging, service equipment, special provision, structural equipment, transport documentation, UN Number), 6(2), 10(2)(a), 10(2)(e), 11, 13(1)(a), 13(2)(b), 13(2)(c), 15(3)(a), 15(3)(g), 25(2)(a), 29(a), 36(b)(ii), 38(1), 39(a), 39(c), 40(b), 41(b), 42(b), 43(1)(a), 51, 52(1)(a), 52(1)(b), 52(1)(c), 52(2), 53, 54(1), 54(3)(b), 55(1)(a), 56(1)(a), 56(2)(a), 56(3)(b), 57(1), 58(3)(a), 59(2)(a), 59(2)(b), 61(2), 62(2), 67, 69(1)(b), 69(2)(b), 70(2), 72(1)(b), 72(2)(b), 73(b), 74(a), 75(a), 76(a), 77(a), 78(a), 79, 84, 89, 90, 91, 92, 93,
Australian Code for the Transport of Dangerous Goods by Road and Rail, published by the National Transport Commission, Edition 7.6, 2018 published in May 2018
The whole
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
94(1), 95, 96, 97, 98, 103, 104, 105, 106, 109(b)(i), 110(b)(i), 111(b)(i), 112(b)(i), 113(b)(i), 114(1), 114(2), 115(1), 117(2)(a), 118(1)(a), 119(1)(a), 119(2)(a), 119(3), 120(1)(a), 120(2)(a), 120(3), 121(a), 123, 124, 125, 129(b), 131(1)(b), 133(1), 134, 136(1), 138(1), 140, 141(a), 142(1)(a), 143(1)(a), 143(2), 143(3), 144(2)(a), 147, 148, 150, 151, 152, 172(1)(e), 174(b)(iv), 185(b)(iii), 213(2)(b), 245
Regulations 5 (definition of Assessing Fitness to Drive Medical Standards), 200 and 207
Assessing Fitness to Drive for commercial and private vehicle drivers. Medical standards for licensing and clinical management guidelines, Fifth Edition published 1 August 2017 by Austroads Ltd
The whole
Regulation 5 (definition of freight container)
Australian/New Zealand Standard AS/NZS 3711.1:2015, Freight containers – Classification, dimensions and ratings, published 11 June 2015 by Standards Australia
The whole
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Regulations 5 (definitions of ICAO approved and ICAO Technical Instructions), 80(4), 81(4), 82(4), 85(4), 86(4) and 87(4)
Technical Instructions for The Safe Transport of Dangerous Goods by Air, published by the International Civil Aviation Organization Doc 9284-AN/905 2017-2018 Edition
The whole
Regulations 5 (definitions of IMDG Code and IMO approved), 80(4), 81(4), 82(4), 85(4), 86(4) and 87(4)
International Maritime Dangerous Goods Code, Edition published in 2016 by the International Maritime Organization
The whole
——
Table of Applied, Adopted or Incorporated Matter
The following table of applied, adopted or incorporated matter was included in S.R. No. 27/2021 in accordance with the requirements of regulation 5 of the Subordinate Legislation Regulations 2014.
In this table—
ADG Code Edition 7.7 means the Australian Code for the Transport of Dangerous Goods by Road & Rail, published by the National Transport Commission, Edition 7.7, 2020 published in June 2020;
Principal Regulations means the Dangerous Goods (Transport by Road or Rail) Regulations 2018.
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Regulation 6 which substitutes regulation 50 in the Principal Regulations
ADG Code Edition 7.7
Chapters 3.4 and 3.5
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Regulation 7 which amends regulation 52(1) of the Principal Regulations
ADG Code Edition 7.7
Chapters 3.4 and 3.5
Regulation 8 which amends regulation 59(a) and (b) of the Principal Regulations
ADG Code Edition 7.7
Chapters 3.4 and 3.5
Regulation 13 which inserts regulation 102A and the definition of nominally empty storage vessel, in the Principal Regulations
ADG Code Edition 7.7
Section 7.2.7.1
Regulation 13 which inserts regulations 102B, 102C, 102D and 102E in the Principal Regulations
ADG Code Edition 7.7
Chapter 7.2
Regulation 14 which inserts regulations 140A, 140B and 140C in the Principal Regulations
ADG Code Edition 7.7
Section 3.4.12.1
Regulation 16 which inserts regulations 152A, 152B, 152C and 152D in the Principal Regulations
ADG Code Edition 7.7
Part 13
——
Table of Applied, Adopted or Incorporated Matter
The following table of applied, adopted or incorporated matter was included in S.R. No. 103/2023 in accordance with the requirements of regulation 5 of the Subordinate Legislation Regulations 2014.
In this table—
ADG Code Edition 7.8 means the Australian Code for the Transport of Dangerous Goods by Road & Rail, published by the National Transport Commission, Edition 7.8, 2022 published in March 2023;
Principal Regulations means the Dangerous Goods (Transport by Road or Rail) Regulations 2018.
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Regulation 5 which amends regulation 5 of the Principal Regulations
ADG Code Edition 7.8
Section 1.2.1
Regulation 7 which substitutes regulation 15 of the Principal Regulations
ADG Code Edition 7.8
Section 2.2.1.1
Regulation 8 which inserts regulation 22A in the Principal Regulations
ADG Code Edition 7.8
Part 2 and Chapters 3.2 and 3.3
Regulation 11 which amends regulation 67 of the Principal Regulations
ADG Code Edition 7.8
Chapter 6.7 and sections 6.9.2.10 and 6.10.2.2
Regulation 12 which amends regulations 89, 90, 91, 92 and 93 of the Principal Regulations
ADG Code Edition 7.8
Chapter 6.10
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Regulation 15 which amends regulation 213(2)(b) of the Principal Regulations
ADG Code Edition 7.8
Chapter 6.10
↑