1Citation
These regulations may be cited as the Environmental Protection (Metal Coating) Regulations 2001.
Parliamentary material from the official source. Links open the official source in a new tab.
Bill homepageThese regulations may be cited as the Environmental Protection (Metal Coating) Regulations 2001.
In these regulations, unless the contrary intention appears —
bund means a wall constructed of brick, stone, concrete, or other material approved in writing by the Chief Executive Officer to form the perimeter of a compound;
compound means an area of land enclosed by a bund;
dust collection system means a device used to collect dust from a powder coating booth and the ducts used to transfer the dust to an air cleaning system;
liquid waste means waste liquid from a metal coating process;
metal coating means a method used to coat metal products including spray painting, powder coating, and enamelling;
metal coating treatment tank means a tank in which an etchant or any other pre‑painting chemical is stored;
operator means a person carrying on metal coating;
over spray means paint, powder, or solvent that does not adhere to an object that is being coated or being cleaned for the purpose of being coated;
powder coating means the coating of metal by the application of a thermosetting powder by means of electrostatic attraction;
powder coating booth means a room or enclosure in which powder coating is done;
premises, in relation to an operator, means the premises at which the operator carries on metal coating;
solid waste means a waste from a metal coating process that is not a liquid waste;
spray painting booth means a room or enclosure in which spray painting is done.
These regulations apply to metal coating premises described in Schedule 1 Part 2 category 81 of the Environmental Protection Regulations 1987.
An operator must carry on all spray painting in a spray painting booth unless such a booth cannot reasonably be used because of the size, shape, position, or location of the object being painted.
An operator must not carry on spray painting other than in a spray painting booth unless it is carried on in such a manner that no paint over spray escapes from the premises at which the spray painting is carried on (or if there are no defined boundaries to the premises, no such paint over spray escapes onto any place to which the public has access).
An operator must ensure that a spray painting booth that he or she is using to carry on metal coating —
is designed, constructed, installed, and maintained in accordance with AS/NZS 4114.1 — Spray painting booths; and
is fitted with an efficient mechanical ventilation and dust extraction system which is operating so that —
no visible paint over spray escapes from the spray painting booth;
all air from the spray painting booth passes through a ventilation and dust extraction system before being discharged into the environment; and
air discharged into the environment does not contain any substance that causes pollution.
An operator must carry on all powder coating in a powder coating booth.
An operator must ensure that a powder coating booth that he or she is using to carry on metal coating —
is designed, constructed, installed, and maintained in accordance with AS/NZS 3754 — 1990 — Safe application of powder coatings by electrostatic spraying; and
is fitted with an efficient mechanical ventilation and dust collection system which is operating so that —
no visible powder escapes from the powder coating booth;
all air from the powder coating booth passes through a ventilation and dust collection system before being discharged into the environment; and
air discharged into the environment from a powder coating booth does not contain any substance that causes pollution.
An operator must ensure that no visible dust or powder escapes from the premises.
An operator must ensure that any area on premises in which a chemical that can cause pollution is used or kept is within a compound which —
has walls that are impervious to acid;
has a floor that is impervious to acid; and
is capable of holding —
110% of the volume of the largest metal coating treatment tank or, if tanks are interconnected, 110% of the volume of the tanks in the interconnected system; and
not less than 25% of the total volume of the tanks within the compound.
An operator must ensure —
that storm water does not enter the area on the premises where metal coating treatment tanks are located; and
that the area on the premises where metal coating treatment tanks are located is designed to ensure that a liquid is not capable of overflowing or discharging from the area.
An operator must ensure that no liquid waste escapes from the premises.
An operator must not discharge liquid waste into the environment.
An operator must ensure that solid waste is disposed of at a landfill site or waste treatment facility licensed under Part V of the Act.
Showing the first 12 of 28 provisions. See all provisions