Conditions of permit
58A Conditions of permit
A protection zone installation permit held by a carrier is subject to the following conditions:
a condition that so much of the relevant cable or cables as is installed in a protection zone must be installed within:
75 metres of the route or routes specified by the ACMA in the permit; or
if the ACMA specifies another distance in the permit—that distance of the route or routes specified by the ACMA in the permit;
if the permit is covered by paragraph 56(1)(b) or (c) of this Schedule—a condition that so much of the relevant cable or cables as is installed in Australian waters that:
are not in a protection zone; and
are not coastal waters of a State or the Northern Territory;
must be installed within:
926 metres of the route or routes specified by the ACMA in the permit; or
if the ACMA specifies another distance in the permit—that distance of the route or routes specified by the ACMA in the permit;
a condition that the carrier, or a person acting on behalf of the carrier, must not install the relevant cable or cables unless all Commonwealth regulatory approvals have been obtained for the installation;
such conditions (if any) in relation to security as the ACMA specifies in the permit;
such conditions (if any) in relation to the installation of the relevant cable or cables as the ACMA specifies in the permit.
Variation of conditions
The ACMA may, by written notice given to the holder of a protection zone installation permit:
vary a condition covered by paragraph (1)(a) or (b) by:
specifying a distance; or
varying a distance; or
vary a condition covered by paragraph (1)(d) or (e).
The statute text is free to read above. View subscription options to unlock the case-law research tools for each provision.