s 27

Accuracy of Inspectors’ Class 1 standards of measurement—maximum permissible uncertainty

In force

For paragraph 19(1)(e), the accuracy with which an Inspectors’ Class 1 standard of measurement is verified must be expressed as an uncertainty that does not exceed:

(a)

for a standard for the measurement of length of a denomination stated in column 1 in Schedule 7—the maximum permissible uncertainty stated for the denomination in column 2 in that Schedule; or

(b)

for a standard for the measurement of area of a denomination stated in column 1 in Schedule 8—the maximum permissible uncertainty stated for the denomination in column 2 in that Schedule; or

(c)

for a standard for the measurement of mass of a denomination stated in column 1 in Schedule 9—the maximum permissible uncertainty stated for the denomination in column 2 in that Schedule; or

(d)

for a standard for the measurement of volume of a denomination stated in column 1 in Schedule 10—the maximum permissible uncertainty stated for the denomination in column 2 in that Schedule; or

(e)

for a standard for the measurement of area, mass or volume of a denomination not stated in column 1 in Schedule 8, 9 or 10—the maximum permissible uncertainty appropriate to the denomination when linear interpolation is applied to the maximum permissible uncertainty stated:

(i)

for a standard for the measurement of area—in column 2 in Schedule 8; or

(ii)

for a standard for the measurement of mass—in column 2 in Schedule 9; or

(iii)

for a standard for the measurement of volume—in column 2 in Schedule 10.

Research tools for this sectionPro

Cited by Analyse Interrogate History Equivalents

The statute text is free to read above. View Pro plans to unlock the case-law research tools for each provision.