Heavy Vehicle (Vehicle Standards) National Regulation (NSW)

This section applies to a heavy vehicle, other than a vehicle built after 20 February 2016 that complies with ADR 42/04 or a later version of ADR 42, that—

is at least 2.2m wide; and

has a body with a vertical measurement less than 300mm at the rear, measured from the lowest point of the body above ground level to the highest point; and

is not fitted with rear marking plates or conspicuity markings in accordance with section 80.

The heavy vehicle must have a white or silver band at least 75mm high across the full width of the rearmost part of the vehicle’s body.