1Name of regulations
These regulations are the Australian Vehicle Standards Rules (the
Vehicle Standards).
These regulations are the Australian Vehicle Standards Rules (the
Vehicle Standards).
The object of the Vehicle Standards is to set standards, about the construction and performance of motor vehicles, trailers and combinations, that are uniform throughout Australia.
The standards are intended:
to promote, throughout the life of motor vehicles, trailers and combinations, their safe use and efficiency and the protection of the environment; and
to reduce the cost of transport administration.
Division 2 Some features of the Vehicle Standards
The dictionary at the end of the Vehicle Standards defines certain words and expressions, and includes signpost definitions to words and expressions defined elsewhere in the Vehicle Standards.
Note A signpost definition (eg road-related area see rule 9) is included in the dictionary if the definition applies outside the rule defining the word or expression.
The dictionary is part of the Vehicle Standards.
A definition in the Vehicle Standards applies to each use of the word or expression in the Vehicle Standards, unless the contrary intention appears.
A diagram in the Vehicle Standards is part of the Vehicle Standards.
A diagram of something (except the essential diagram in rule 165) is an illustrative example of the thing in black and white, but does not represent its dimensions or the dimensions of any part of it.
Note The essential diagram in rule 165 provides the dimensions required for a 75 millimetre kingpin used in a B-double or road train.
A reference in the Vehicle Standards to another law of this jurisdiction includes any provision of the Motor Vehicles
(Standards) Regulations 2003 other than the Vehicle Standards.
A note in the Vehicle Standards is explanatory and is not part of the
Vehicle Standards.
An example (whether or not in the form of a diagram) in the Vehicle Standards is part of the Vehicle Standards.
If the Vehicle Standards includes an example of the operation of a provision of the Vehicle Standards:
the example is not exhaustive; and
the example does not limit, and may extend, the meaning of the provision; and
the example and the provision are to be read in the context of each other and of the other provisions of the Vehicle Standards, but, if the example and the provision as so read are inconsistent, the provision prevails.
Part 2 Application of the Vehicle Standards
The Vehicle Standards apply to motor vehicles, trailers and combinations on roads and road-related areas.
A road is an area that is open to or used by the public and is developed for, or has as one of its main uses, the driving or riding of motor vehicles.
A road-related area is any of the following:
an area that divides a road;
a footpath or nature strip adjacent to a road;
an area that is open to the public and is designated for use by cyclists or animals;
an area that is not a road and that is open to or used by the public for driving, riding or parking vehicles.
The Vehicle Standards do not apply to:
a vehicle used only on a railway or tramway; or
a vehicle designed to be controlled by a person walking next to it; or
a vehicle propelled by a motor with a maximum power output of not over 200 watts; or
a motorised wheelchair that cannot travel at over 10 kilometres an hour; or
a vehicle or combination that is being repaired, or is being tested in the course of being repaired, so it will comply with the Vehicle Standards; or
a vehicle or combination being driven or towed directly to a place where it is to be repaired so it will comply with the Vehicle Standards; or
a vehicle that is categorised, in the Australian Design Rules, as a power-assisted pedal cycle; or
a vehicle that was categorised, in a third edition ADR, as a power-assisted pedal cycle, but is no longer categorised as a power-assisted pedal cycle because of a change to the category.
Showing the first 11 of 186 provisions. See all provisions