Explanatory details
Endnote 3 Explanatory details
Reg. 5 definition of Building Regulations: S.R. No. 38/2018 as amended by S.R. Nos 38/2018, 75/2018 and 100/2018. ↑
Reg. 5 definition of Restricted electrical worker's licence (Class 2): S.R. No. 21/2010. ↑
Reg. 50 definition of former class of plumbing work: S.R. No. 136/2008. Reprint No. 1 as at 4 April 2013. Reprinted to S.R. No. 113/2012. Subsequently amended by S.R. Nos 113/2012, 81/2013, 60/2014, 157/2015 and 31/2016.
——
Fee Units
These Regulations provide for fees by reference to fee units within the meaning of the Monetary Units Act 2004. The amount of the fee is to be calculated, in accordance with section 7 of that Act, by multiplying the number of fee units applicable by the value of a fee unit.
The value of a fee unit for the financial year commencing 1 July 2025 is $16.81. The amount of the calculated fee may be rounded to the nearest 10 cents.
The value of a fee unit for future financial years is to be fixed by the Treasurer under section 5 of the Monetary Units Act 2004. The value of a fee unit for a financial year must be published in the Government Gazette and a Victorian newspaper before 1 June in the preceding financial year.
——
Table of Applied, Adopted or Incorporated Matter
The following table of applied, adopted or incorporated matter was included in S.R. No. 149/2018 in accordance with the requirements of regulation 5 of the Subordinate Legislation Regulations 2014.
In this table, PCA means the Plumbing Code of Australia within the meaning of Part 12A of the Act.
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Regulation 5 (definition of AS 1851)
AS 1851—2012 Routine service of fire protection systems and equipment, published by Standards Australia on 3 December 2012, as amended on 16 November 2016
The whole
Regulation 5 (definition of AS 2118.2)
AS 2118.2—2010 Automatic fire sprinkler systems Part 2: Drencher systems, published by Standards Australia on 20 August 2010
The whole
Regulation 5 (definition of AS 2118.3)
AS 2118.3—2010 Automatic fire sprinkler systems Part 3: Deluge systems, published by Standards Australia on 20 August 2010
The whole
Regulation 5 (definition of AS 2118.8)
AS 2118.8—1997 Automatic fire sprinkler systems Part 8: Minor modifications, published by Standards Australia on 5 December 1997, reconfirmed on 11 July 2013
The whole
Regulation 5 (definition of AS 2118.10)
AS 2118.10—1995 Automatic fire sprinkler systems Part 10: Approval documentation, published by Standards Australia on 5 June 1995, reconfirmed on 11 July 2013
The whole
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Regulation 5 (definition of AS 2473.3)
AS 2473.3—2007 Valves for compressed gas cylinders Part 3: Outlet connections for medical gases (including pin‑indexed yoke connections), published by Standards Australia on 4 December 2007, reconfirmed on 7 July 2017
The whole
Regulation 5 (definition of AS 2568)
AS 2568—1991 Medical gases—Purity of compressed medical breathing air, published by Standards Australia on 11 February 1991
The whole
Regulation 5 (definition of AS 2845.2)
AS 2845.2—2010 Water supply—Backflow preventions devices Part 2: Registered air gaps and registered break tanks, published by Standards Australia on 30 June 2010
The whole
Regulation 5 (definition of AS 2896)
AS 2896—2011 Medical gas systems—Installation and testing of non-flammable medical gas pipeline systems, published by Standards Australia on 8 February 2011
The whole
Regulation 5 (definition of AS 2902)
AS 2902—2005 Medical gas systems—Low pressure flexible hose assemblies, published by Standards Australia on 15 July 2005, reconfirmed on 9 December 2016
The whole
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Regulation 5 (definition of AS 2941)
AS 2941—2013 Fixed fire protection installations—Pumpset systems, published by Standards Australia on 18 November 2013
The whole
Regulation 5 (definition of AS 3814)
AS 3814:2015 Industrial and commercial gas-fired appliances, published by Standards Australia on 18 February 2015
The whole
Regulation 5 (definition of AS 4032.3)
AS 4032.3—2004 Water supply—Valves for the control of heated water supply temperatures
Part 3: Requirements for field‑testing, maintenance or replacement of thermostatic mixing valves, tempering valves and end-of-line temperature control devices, published by Standards Australia on 20 February 2004The whole
Regulation 5 (definition of AS 4118.1.1)
AS 4118.1.1—1996 Fire sprinkler systems Part 1.1: Components—Sprinklers and sprayers, published by Standards Australia on 5 June 1996, reconfirmed on 10 July 2013
The whole
Regulation 5 (definition of AS 4118.1.2)
AS 4118.1.2—1996 Fire sprinkler systems Part 1.2: Components—Alarm valves (wet), published by Standards Australia on 5 January 1996, reconfirmed on 10 July 2013
The whole
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Regulation 5 (definition of AS 4118.1.3)
AS 4118.1.3—1995 Fire sprinkler systems Part 1.3: Components—Water motor alarms, published by Standards Australia on 5 June 1995, reconfirmed on 10 July 2013
The whole
Regulation 5 (definition of AS 4118.1.4)
AS 4118.1.4—1994 Fire sprinkler systems Part 1.4: Components—Valve monitors, published by Standards Australia on 17 January 1994, reconfirmed on 10 July 2013
The whole
Regulation 5 (definition of AS 4118.1.5)
AS 4118.1.5—1996 Fire sprinkler systems Part 1.5 Components—Deluge and pre-action valves, published by Standards Australia on 5 January 1996, reconfirmed on 10 July 2013
The whole
Regulation 5 (definition of AS 4118.1.6)
AS 4118.1.6—1995 Fire sprinkler systems Part 1.6: Components—Stop valves and non-return valves, published by Standards Australia on 5 April 1995, reconfirmed on 10 July 2013
The whole
Regulation 5 (definition of AS 4118.1.7)
AS 4118.1.7—1996 Fire sprinkler systems Part 1.7: Components—Alarm valves (dry), published by Standards Australia on 5 January 1996, reconfirmed on 10 July 2013
The whole
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Regulation 5 (definition of AS 4118.1.8)
AS 4118.1.8—1999 Fire sprinkler systems Part 1.8: Components—Pressure-reducing valves, published by Standards Australia on 5 May 1999, reconfirmed on 10 July 2013
The whole
Regulation 5 (definition of AS 4575)
AS 4575—2005 Gas appliances—Quality of servicing, published by Standards Australia on 25 February 2005
The whole
Regulation 5 (definition of AS/NZS 1530.3)
AS/NZS 1530.3:1999 Methods for fire tests on building materials, components and structures Part 3: Simultaneous determination of ignitability, flame propagation, heat release and smoke release, published jointly by Standards Australia and Standards New Zealand on 5 November 1999, reconfirmed on 10 June 2016
The whole
Regulation 5 (definition of AS/NZS 2918)
AS/NZS 2918:2018 Domestic solid fuel burning appliances—Installation, 2nd edition, published jointly by Standards Australia and Standards New Zealand on 29 June 2018
The whole
Regulation 5 (definition of AS/NZS 3500.0)
AS/NZS 3500.0:2003 Plumbing and drainage Part 0: Glossary of terms, published jointly by Standards Australia and Standards New Zealand on 15 December 2003
The whole
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Regulation 5 (definition of AS/NZS 3500.1)
AS/NZS 3500.1:2018 Plumbing and drainage Part 1: Water services, published jointly by Standards Australia and Standards New Zealand on 30 June 2015, as amended on 5 September 2017
The whole
Regulation 5 (definition of AS/NZS 3500.2)
AS/NZS 3500.2:2018 Plumbing and drainage
Part 2: Sanitary plumbing and drainage, published jointly by Standards Australia and Standards New Zealand on 30 June 2015, as amended on 30 June 2017 and 24 November 2017The whole
Regulation 5 (definition of AS/NZS 4234)
AS/NZS 4234:2008 Heated water systems—Calculation of energy consumption, published jointly by Standards Australia and Standards New Zealand on 21 August 2008, as amended on 29 March 2011, 14 November 2011 and 11 November 2014
The whole
Regulation 5 (definition of AS/NZS 4859.1)
AS/NZS 4859.1:2002 Materials for the thermal insulation of buildings Part 1: General criteria and technical provisions, published jointly by Standards Australia and Standards New Zealand on 15 October 2002, as amended on 28 December 2006
The whole
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Regulation 5 (definition of AS/NZS 5149.1)
AS/NZS 5149.1:2016 Refrigerating systems and heat pumps—Safety and environmental requirements—Part 1: Definitions, classification and selection criteria (ISO 5149-1:2014, MOD), published jointly by Standards Australia and Standards New Zealand on 19 October 2016 as amended on 19 July 2018
The whole
Regulation 5 (definition of AS/NZS 5149.2)
AS/NZS 5149.2:2016 Refrigerating systems and heat pumps—Safety and environmental requirements—Part 2: Design, construction, testing, marking and documentation (ISO 5149-2:2014, MOD), published jointly by Standards Australia and Standards New Zealand on 19 October 2016
The whole
Regulation 5 (definition of AS/NZS 5149.3)
AS/NZS 5149.3:2016 Refrigerating systems and heat pumps—Safety and environmental requirements—Part 3: Installation site (ISO 5149-3:2014, MOD), published jointly by Standards Australia and Standards New Zealand on 19 October 2016
The whole
Regulation 5 (definition of AS/NZS 5149.4)
AS/NZS 5149.4:2016 Refrigerating systems and heat pumps—Safety and environmental requirements—Part 4: Operation, maintenance, repair and
The whole
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
recovery (ISO 5149-4:2014, MOD), published jointly by Standards Australia and Standards New Zealand on 19 October 2016
Regulation 5 (definition of AS/NZS 5601.1)
AS/NZS 5601.1:2013 Gas Installations Part 1: General installations, published jointly by Standards Australia and Standards New Zealand on 16 September 2013 as amended 27 August 2015 and 11 May 2016
The whole
Regulation 5 (definition of AS/NZS 5601.2)
AS/NZS 5601.2:2013 Gas installations Part 2: LP Gas installations in caravans and boats for non-propulsive purposes, published jointly by Standards Australia and Standards New Zealand on 16 September 2013, as amended 11 May 2016
and 9 March 2017The whole
Regulation 5 (definition of AS/NZS 6400)
AS/NZS 6400:2016 Water efficient products—Rating and labelling, published jointly by Standards Australia and Standards New Zealand on 6 April 2016
The whole
Regulation 5 (definition of AS/NZS ISO 817)
AS/NZS ISO 817:2016 Refrigerants—Designation and safety classification, published jointly by Standards Australia and Standards New Zealand on 19 October 2016
The whole
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Regulation 5 (definition of Australia and New Zealand Refrigerant handling code of practice 2007 Part 1)
Australia and New Zealand Refrigerant handling code of practice 2007 Part 1—Self‑contained low charge systems, prepared jointly by the Australian Institute of Refrigeration, Air Conditioning and Heating and the Institute of Refrigeration, Heating and Air Conditioning Engineers New Zealand, published September 2007
The whole
Regulation 5 (definition of Australia and New Zealand Refrigerant handling code of practice 2007 Part 2)
Australia and New Zealand Refrigerant handling code of practice 2007 Part 2—Systems other than self‑contained low charge systems, prepared jointly by the Australian Institute of Refrigeration, Air Conditioning and Heating and the Institute of Refrigeration, Heating and Air Conditioning Engineers New Zealand, published September 2007
The whole
Regulation 5 (definition of Climate zone 4)
AS/NZS 4234:2008 Heated water systems—Calculation of energy consumption, published jointly by Standards Australia and Standards New Zealand on 21 August 2008, as amended on 29 March 2011, 14 November 2011 and 11 November 2014
The whole
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Regulation 5 (definition of HB 276)
HB 276—2004 A Guide to Good Practice for Energy Efficient Installation of Residential Heating, Cooling and Air Conditioning Plant and Equipment, published jointly by the Plumbing Industry Commission and Standards Australia on 31 December 2004, reconfirmed on 27 May 2016
The whole
Regulation 5 (definition of network utility operator)
AS/NZS 3500.0:2003 Plumbing and drainage Part 0: Glossary of terms, published jointly by the Standards Australia and Standards New Zealand on 15 December 2003
The whole
Regulation 5 (definition of PCA)
PCA
The whole except as set out in regulation 8
Regulation 5 (definition of routine servicing)
AS 1851—2012 Routine service of fire protection systems and equipment, published by Standards Australia on 3 December 2012, as amended on 16 November 2016
The whole
Regulation 5 (definition of
SA HB 39)SA HB 39:2015 Installation code for metal roof and wall cladding, as issued, published or remade from time to time
The whole
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Regulation 5 (definition of SAA/SNZ HB 114)
SAA/SNZ HB 114:1998 Guidelines for the design of eaves and box gutters, published jointly by Standards Australia and Standards New Zealand on 5 November 1998
The whole
Regulation 5 (definition of Vehicle Standard (Australian Design Rule 42/00—General Safety Requirements) 2006)
Vehicle Standard (Australian Design Rule 42/00—General Safety Requirements) 2006, determined under section 7 of the Motor Vehicle Standards Act 1989 of the Commonwealth
The whole
Regulation 5 (definition of water efficient shower head)
AS/NZS 6400:2016 Water efficient products—Rating and labelling, published jointly by Standards Australia and Standards New Zealand on 6 April 2016
The whole
Regulation 6(7)
AS 3814:2015 Industrial and commercial gas-fired appliances, published by Standards Australia on 18 February 2015
The whole
Regulation 6(7)
AS 4575—2005 Gas appliances—Quality of servicing, published by Standards Australia on 25 February 2005
The whole
Regulation 6(7)
AS/NZS 5601.1:2013 Gas Installations Part 1: General installations, published jointly by Standards Australia and Standards New Zealand on 16 September 2013, as amended 27 August 2015 and 11 May 2016
The whole
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Regulation 6(7)
AS/NZS 5601.2:2013 Gas installations Part 2: LP Gas installations in caravans and boats for non-propulsive purposes, published jointly by Standards Australia and Standards New Zealand on 16 September 2013, as amended 11 May 2016 and 9 March 2017
The whole
Regulation 7
PCA
The whole except as set out in regulation 8
Regulation 8(1)
PCA
The whole except as set out in regulation 8
Regulation 9
PCA
The whole except as set out in regulation 8
Regulation 32
AS/NZS 3500.1:2018 Plumbing and drainage Part 1: Water services, published jointly by Standards Australia and Standards New Zealand on 30 June 2015, as amended on 5 September 2017
Column 1 of Table 4.4.1
Schedule 2 Part 1 Division 1 Clause 1(1)
AS/NZS 3500.2:2018 Plumbing and drainage Part 2: Sanitary plumbing and drainage, published jointly by Standards Australia and Standards New Zealand on 30 June 2015, as amended on 30 June 2017 and 24 November 2017
Clause 3.2 Location of drains
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Schedule 2 Part 1 Division 1 Clause 1(2)(b)
AS/NZS 3500.2:2018 Plumbing and drainage Part 2: Sanitary plumbing and drainage, published jointly by Standards Australia and Standards New Zealand on 30 June 2015, as amended on 30 June 2017 and 24 November 2017
Clause 2.4 Limitation on the use of pipes and fittings
Schedule 2 Part 1 Division 2 Clause 2(a)
AS/NZS 1530.3:1999 Methods for fire tests on building materials, components and structures Part 3: Simultaneous determination of ignitability, flame propagation, heat release and smoke release, published jointly by Standards Australia and Standards New Zealand on 5 November 1999, reconfirmed on 10 June 2016
The whole
Schedule 2 Part 1 Division 2 Clause 2(b)
AS 4118.1.1—1996 Fire sprinkler systems Part 1.1: Components—Sprinklers and sprayers, published by Standards Australia on 5 June 1996, reconfirmed on 10 July 2013
The whole
Schedule 2 Part 1 Division 2 Clause 2(c)
AS 4118.1.2—1996 Fire sprinkler systems Part 1.2: Components—Alarm valves (wet), published by Standards Australia on 5 January 1996, reconfirmed on 10 July 2013
The whole
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Schedule 2 Part 1 Division 2 Clause 2(d)
AS 4118.1.3—1995 Fire sprinkler systems Part 1.3: Components—Water motor alarms, published by Standards Australia on 5 June 1995, reconfirmed on 10 July 2013
The whole
Schedule 2 Part 1 Division 2 Clause 2(e)
AS 4118.1.4—1994 Fire sprinkler systems Part 1.4: Components—Valve monitors, published by Standards Australia on 17 January 1994, reconfirmed on 10 July 2013
The whole
Schedule 2 Part 1 Division 2 Clause 2(f)
AS 4118.1.5—1996 Fire sprinkler systems Part 1.5 Components—Deluge and pre-action valves, published by Standards Australia on 5 January 1996, reconfirmed on 10 July 2013
The whole
Schedule 2 Part 1 Division 2 Clause 2(g)
AS 4118.1.6—1995 Fire sprinkler systems Part 1.6: Components—Stop valves and non-return valves, published by Standards Australia on 5 April 1995, reconfirmed on 10 July 2013
The whole
Schedule 2 Part 1 Division 2 Clause 2(h)
AS 4118.1.7—1996 Fire sprinkler systems Part 1.7: Components—Alarm valves (dry), published by Standards Australia on 5 January 1996, reconfirmed on 10 July 2013
The whole
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Schedule 2 Part 1 Division 2 Clause 2(i)
AS 4118.1.8—1999 Fire sprinkler systems Part 1.8: Components—Pressure-reducing valves, published by Standards Australia on 5 May 1999, reconfirmed on 10 July 2013
The whole
Schedule 2 Part 1 Division 2 Clause 2(j)
AS 2941—2013 Fixed fire protection installations—Pumpset systems, published by Standards Australia on 18 November 2013
The whole
Schedule 2 Part 1 Division 2 Clause 2(k)
AS 2118.2—2010 Automatic fire sprinkler systems Part 2: Drencher systems, published by Standards Australia on 20 August 2010
The whole
Schedule 2 Part 1 Division 2 Clause 2(l)
AS 2118.3—2010 Automatic fire sprinkler systems Part 3: Deluge systems, published by Standards Australia on 20 August 2010
The whole
Schedule 2 Part 1 Division 2 Clause 2(m)
AS 2118.8—1997 Automatic fire sprinkler systems Part 8: Minor modifications, published by Standards Australia on 5 December 1997, reconfirmed on 11 July 2013
The whole
Schedule 2 Part 1 Division 2 Clause 2(n)
AS 2118.10—1995 Automatic fire sprinkler systems Part 10: Approval documentation, published by Standards Australia on 5 June 1995, reconfirmed on 11 July 2013
The whole
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Schedule 2 Part 1 Division 2 Clause 2(o)
AS 1851—2012 Routine service of fire protection systems and equipment, published by Standards Australia on 3 December 2012, as amended on 16 November 2016
The whole
Schedule 2 Part 1 Division 3 Clause 3(a)
AS/NZS 2918:2018 Domestic solid fuel burning appliances—Installation, 2nd edition, published jointly by Standards Australia and Standards New Zealand on 29 June 2018
The whole
Schedule 2 Part 1 Division 3 Clause 3(b)
AS 2896—2011 Medical gas systems—Installation and testing of non-flammable medical gas pipeline systems, published by Standards Australia on 8 February 2011
The whole
Schedule 2 Part 1 Division 3 Clause 3(c)
AS 2473.3—2007 Valves for compressed gas cylinders Part 3: Outlet connections for medical gases (including pin‑indexed yoke connections), published by Standards Australia on 4 December 2007, reconfirmed on 7 July 2017
The whole
Schedule 2 Part 1 Division 3 Clause 3(d)
AS 2568—1991 Medical gases—Purity of compressed medical breathing air, published by Standards Australia on 11 February 1991
The whole
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Schedule 2 Part 1 Division 3 Clause 3(e)
AS 2902—2005 Medical gas systems—Low pressure flexible hose assemblies, published by Standards Australia on 15 July 2005, reconfirmed on 9 December 2016
The whole
Schedule 2 Part 1 Division 3 Clause 3(f)
AS/NZS 4859.1:2002 Materials for the thermal insulation of buildings Part 1: General criteria and technical provisions, published jointly by Standards Australia and Standards New Zealand on 15 October 2002, as amended on 28 December 2006
The whole
Schedule 2 Part 1 Division 3 Clause 3(g)
HB 276—2004 A Guide to Good Practice for Energy Efficient Installation of Residential Heating, Cooling and Air Conditioning Plant and Equipment, published jointly by the Plumbing Industry Commission and Standards Australia on 31 December 2004, reconfirmed on 27 May 2016
The whole
Schedule 2 Part 1 Division 4 Clause 4(a)
AS/NZS ISO 817:2016 Refrigerants—Designation and safety classification, published jointly by Standards Australia and Standards New Zealand on 19 October 2016
The whole
Schedule 2 Part 1 Division 4 Clause 4(b)
AS/NZS 5149.1:2016 Refrigerating systems and heat pumps—Safety and environmental requirements—Part 1: Definitions,
The whole
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
classification and selection criteria (ISO 5149-1:2014, MOD), published jointly by Standards Australia and Standards New Zealand on 19 October 2016 as amended on 19 July 2018
Schedule 2 Part 1 Division 4 Clause 4(c)
AS/NZS 5149.2:2016 Refrigerating systems and heat pumps—Safety and environmental requirements—Part 2: Design, construction, testing, marking and documentation (ISO 5149-2:2014, MOD), published jointly by Standards Australia and Standards New Zealand on 19 October 2016
The whole
Schedule 2 Part 1 Division 4 Clause 4(d)
AS/NZS 5149.3:2016 Refrigerating systems and heat pumps—Safety and environmental requirements—Part 3: Installation site (ISO 5149-3:2014, MOD), published jointly by Standards Australia and Standards New Zealand on 19 October 2016
The whole
Schedule 2 Part 1 Division 4 Clause 4(e)
AS/NZS 5149.4:2016 Refrigerating systems and heat pumps—Safety and environmental requirements—Part 4: Operation, maintenance, repair and recovery (ISO 5149-4:2014, MOD), published jointly by Standards Australia and Standards New Zealand on 19 October 2016
The whole
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Schedule 2 Part 1 Division 4 Clause 4(f)
HB 276—2004 A Guide to Good Practice for Energy Efficient Installation of Residential Heating, Cooling and Air Conditioning Plant and Equipment, published jointly by the Plumbing Industry Commission and Standards Australia on 31 December 2004, reconfirmed on 27 May 2016
The whole
Schedule 2 Part 1 Division 4 Clause 4(g)
Australia and New Zealand Refrigerant handling code of practice 2007 Part 1—Self‑contained low charge systems, prepared jointly by the Australian Institute of Refrigeration, Air Conditioning and Heating and the Institute of Refrigeration, Heating and Air Conditioning Engineers New Zealand, published September 2007
The whole
Schedule 2 Part 1 Division 4 Clause 4(h)
Australia and New Zealand Refrigerant handling code of practice 2007 Part 2—Systems other than self‑contained low charge systems, prepared jointly by the Australian Institute of Refrigeration, Air Conditioning and Heating and the Institute of Refrigeration, Heating and Air Conditioning Engineers New Zealand, published September 2007
The whole
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Schedule 2 Part 1 Division 5 Clause 5(a)
SA HB 39:2015 Installation code for metal roof and wall cladding, as issued, published or remade from time to time
The whole
Schedule 2 Part 1 Division 5 Clause 5(b)
SAA/SNZ HB 114:1998 Guidelines for the design of eaves and box gutters, published jointly by Standards Australia and Standards New Zealand on 5 November 1998
The whole
Schedule 2 Part 1 Division 6 Clause 6
Vehicle Standard (Australian Design Rule 42/00—General Safety Requirements) 2006, determined under section 7 of the Motor Vehicle Standards Act 1989 of the Commonwealth
Clause 42.11
Schedule 2 Part 1 Division 7 Clause 10
AS/NZS 4234:2008 Heated water systems—Calculation of energy consumption, published jointly by Standards Australia and Standards New Zealand on 21 August 2008, as amended on 29 March 2011, 14 November 2011 and 11 November 2014
The whole as modified by Schedule 2 Part 1 Clause 10(2)
Schedule 2 Part 1 Division 7 Clause 11(1)(a)
AS/NZS 4234:2008 Heated water systems—Calculation of energy consumption, published jointly by Standards Australia and Standards New Zealand on 21 August 2008, as amended on 29 March 2011, 14 November 2011 and 11 November 2014
The whole as modified by Schedule 2 Part 1 Division 7 Clause 10(2)
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Schedule 2 Part 2 Division 1 Clause 13
AS 2845.2—2010 Water supply—Backflow preventions devices Part 2: Registered air gaps and registered break tanks, published by Standards Australia on 30 June 2010
The whole
Schedule 2 Part 2 Division 2 Clause 14
AS 4032.3—2004 Water supply—Valves for the control of heated water supply temperatures Part 3: Requirements for field‑testing, maintenance or replacement of thermostatic mixing valves, tempering valves and end-of-line temperature control devices, published by Standards Australia on 20 February 2004
The whole
——
Table of Applied, Adopted or Incorporated Matter
The following table of applied, adopted or incorporated matter was included in S.R. No. 41/2019 in accordance with the requirements of regulation 5 of the Subordinate Legislation Regulations 2014.
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Regulation 4(1) which inserts the definitions of AS/NZS 5149.1, AS/NZS 5149.2, AS/NZS 5149.3 and AS/NZS 5149.4 in regulation 5 of the Plumbing Regulations 2018
AS/NZS 5149.1:2016 Refrigerating systems and heat pumps—Safety and environmental requirements—Part 1: Definitions, classification and selection criteria (ISO 5149-1:2014, MOD), published jointly by Standards Australia and Standards New Zealand on 19 October 2016 as amended on 19 July 2018
AS/NZS 5149.2:2016 Refrigerating systems and heat pumps—Safety and environmental requirements—Part 2: Design, construction, testing, marking and documentation (ISO 5149-2:2014, MOD), published jointly by Standards Australia and Standards New Zealand on 19 October 2016
AS/NZS 5149.3:2016 Refrigerating systems and heat pumps—Safety and environmental requirements—
The whole
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Part 3: Installation site (ISO 5149-3:2014, MOD), published jointly by Standards Australia and Standards New Zealand on 19 October 2016
AS/NZS 5149.4:2016 Refrigerating systems and heat pumps—Safety and environmental requirements—Part 4: Operation, maintenance, repair and recovery (ISO 5149-4:2014, MOD), published jointly by Standards Australia and Standards New Zealand on 19 October 2016
Regulation 7 which substitutes clause 4(b), (c), (d) and (e) of Schedule 2 to the Plumbing Regulations 2018
AS/NZS 5149.1:2016 Refrigerating systems and heat pumps—Safety and environmental requirements—Part 1: Definitions, classification and selection criteria (ISO 5149-1:2014, MOD), published jointly by Standards Australia and Standards New Zealand on 19 October 2016 as amended on 19 July 2018
AS/NZS 5149.2:2016 Refrigerating systems and heat pumps—Safety and environmental requirements—Part 2: Design, construction, testing, marking and documentation (ISO 5149-2:2014, MOD), published jointly by Standards Australia and Standards New Zealand on 19 October 2016
The whole
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
AS/NZS 5149.3:2016 Refrigerating systems and heat pumps—Safety and environmental requirements—Part 3: Installation site (ISO 5149-3:2014, MOD), published jointly by Standards Australia and Standards New Zealand on 19 October 2016
AS/NZS 5149.4:2016 Refrigerating systems and heat pumps—Safety and environmental requirements—Part 4: Operation, maintenance, repair and recovery (ISO 5149-4:2014, MOD), published jointly by Standards Australia and Standards New Zealand on 19 October 2016
——
Table of Applied, Adopted or Incorporated Matter
The following table of applied, adopted or incorporated matter was included in S.R. No. 122/2022 in accordance with the requirements of regulation 5 of the Subordinate Legislation Regulations 2014.
In this table—
PCA means the Plumbing Code of Australia set out in Volume Three of the National Construction Code 2019, published by the Australian Building Codes Board on 1 May 2019, as amended on 1 July 2020, including any variations or additions in the Victorian appendix set out in Schedule 1 to that Volume.
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Regulation 4(1) of the Plumbing Amendment Regulations 2022, which substitutes the definition of AS/NZS 3500.1 in regulation 5 of the Plumbing Regulations 2018
AS/NZS 3500.1:2018 Plumbing and drainage Part 1: Water services, published jointly by Standards Australia and Standards New Zealand on 29 June 2018 as amended on 9 July 2019
The whole
Regulation 4(2) of the Plumbing Amendment Regulations 2022, which substitutes the definition of AS/NZS 3500.2 in regulation 5 of the Plumbing Regulations 2018
AS/NZS 3500.2:2018 Plumbing and drainage Part 2: Sanitary plumbing and drainage, published jointly by Standards Australia and Standards New Zealand on 29 June 2018
The whole
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Regulation 4(3) of the Plumbing Amendment Regulations 2022, which inserts the definitions of AS/NZS 3500.3 and AS/NZS 3500.4 in regulation 5 of the Plumbing Regulations 2018
AS/NZS 3500.3:2018 Plumbing and drainage Part 3: Stormwater drainage, published jointly by Standards Australia and Standards New Zealand on 29 June 2018
AS/NZS 3500.4:2018 Plumbing and drainage Part 4: Heated water services, published jointly by Standards Australia and Standards New Zealand on 29 June 2018 as amended on 29 June 2018 and 26 June 2020
The whole
The wholeRegulation 4(4) of the Plumbing Amendment Regulations 2022, which substitutes the definition of AS/NZS 4234 in regulation 5 of the Plumbing Regulations 2018
AS/NZS 4234:2008 Heated water systems—Calculation of energy consumption, published jointly by Standards Australia and Standards New Zealand on 21 August 2008 as amended on 29 March 2011, 14 November 2011 and 11 November 2014
The whole
Regulation 6(1) and (2) of the Plumbing Amendment Regulations 2022, which amends regulation 9 of the Plumbing Regulations 2018
PCA
The whole
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Regulation 7 of the Plumbing Amendment Regulations 2022, which amends clause 12(2) of Schedule 2 to the Plumbing Regulations 2018
PCA
Clause Vic B1.4(3)
——
Table of Applied, Adopted or Incorporated Matter
The following table of applied, adopted or incorporated matter was included in S.R. No. 102/2023 in accordance with the requirements of regulation 5 of the Subordinate Legislation Regulations 2014.
In this table—
amending regulations means the Building and Plumbing Amendment (National Construction Code and Other Matters) Regulations 2023;
BCA means the Building Code of Australia;
Building Code of Australia means the Building Code of Australia comprising—
(a) Volume One of the National Construction Code 2022, including any Victorian variations or additions set out in Schedule 10 to that Volume; and
(b) Volume Two of the National Construction Code 2022, including any Victorian variations or additions set out in Schedule 10 to that Volume;
BCA Volume One means Volume One of the National Construction Code 2022 including any Victorian variations or additions set out in Schedule 10 to that Volume;
BCA Volume Two means Volume Two of the National Construction Code 2022 including any Victorian variations or additions set out in Schedule 10 to that Volume;
National Construction Code 2019 means the National Construction Code 2019 published by the Australian Building Codes Board in February 2019 and as amended on 1 July 2020;
National Construction Code 2022 means the National Construction Code 2022 published by the Australian Building Codes Board on 1 May 2022;
PCA means the Plumbing Code of Australia set out in Volume Three of the National Construction Code 2022, including any Victorian variations or additions set out in Schedule 10 to that Volume.
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Regulation 3 of the amending regulations, which substitutes the definition of fire performance requirement in regulation 5(1) of the Building Regulations 2018
BCA Volume One
Clauses B1P1, D1P2, D1P3, D1P4 and D1P6 (to the extent the requirement relates to fire safety),
C1P1, C1P2, C1P3, C1P4, C1P5, C1P6, C1P7, C1P8, C1P9, D1P5, E1P1, E1P2, E1P3, E1P4, E1P5, E1P6, E2P1 and E2P2
BCA Volume Two
Clauses H1P1, H3P1 and H3P2 (to the extent the requirement relates to fire safety for a Class 1b building or a Class 10 building not associated with a Class 1a building)
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Regulation 4 of the amending regulations, which inserts new regulation 10A in the Building Regulations 2018
BCA Volume One
Parts F8 and J1 as modified by regulation 10A of the Building Regulations 2018
BCA Volume Two
Clause H4D9, Part H6, clause VIC H6V1, clause VIC H6D2 and Part H8 as modified by regulation 10A of the Building Regulations 2018
Regulation 5(a) of the amending regulations, which amends regulation 29(b) of the Building Regulations 2018
BCA Volume One
Part A5
Regulation 5(b) of the amending regulations, which amends regulation 29(b) of the Building Regulations 2018
BCA Volume Two
Part A5
Regulation 6 of the amending regulations, which amends regulation 125 of the Building Regulations 2018
BCA Volume One
BCA Volume Two
Clause A5G3(1)(e)
Regulation 7(a) of the amending regulations, which amends regulation 128(1) of the Building Regulations 2018
BCA Volume One
Performance Requirement B1P1
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Regulation 7(b) of the amending regulations, which amends regulation 128(1) of the Building Regulations 2018
BCA Volume Two
Performance requirement H1P1
Regulation 8(1) of the amending regulations, which amends regulation 145(2)(a) of the Building Regulations 2018
BCA Volume Two
Clause H3D6
Regulation 8(2) of the amending regulations, which amends regulation 145(3) of the Building Regulations 2018
BCA Volume One
Specification 20
Regulation 8(3) of the amending regulations, which substitutes regulation 145(3)(a) of the Building Regulations 2018
BCA Volume One
Clause S20C3 of Specification 20
Regulation 8(4) of the amending regulations, which substitutes regulation 145(3)(b) of the Building Regulations 2018
BCA Volume One
Clause S20C4 of Specification 20
Regulation 8(5) of the amending regulations, which substitutes regulation 145(3)(c) of the Building Regulations 2018
BCA Volume One
Clause S20C5 of Specification 20
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Regulation 9 of the amending regulations, which amends regulation 146(2) of the Building Regulations 2018
BCA Volume One
Clause E1D4
Regulation 10(1) of the amending regulations, which amends regulation 147(2) of the Building Regulations 2018
BCA Volume One
Clause E1D4
Regulation 10(2) of the amending regulations, which amends regulation 147(4)(b) of the Building Regulations 2018
BCA Volume One
Clause E1D3
Regulation 10(3)(a) of the amending regulations, which amends regulation 147(4)(c) of the Building Regulations 2018
BCA Volume One
Clause G4D4
Regulation 10(3)(b) of the amending regulations, which amends regulation 147(4)(c) of the Building Regulations 2018
BCA Volume One
Clause E4D2
Regulation 10(4) of the amending regulations, which amends regulation 147(5)(d) of the Building Regulations 2018
BCA Volume One
Clause E1D3
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Regulation 10(5) of the amending regulations, which amends regulation 147(5)(e) of the Building Regulations 2018
BCA Volume One
Clauses G4D4 and E4D2
Regulation 11 of the amending regulations, which inserts new regulation 147AA into the Building Regulations 2018
BCA Volume One
VIC Table in Schedule 2 to Schedule 10 as modified by regulation 147AA of the Building Regulations 2018
Regulation 12(a) of the amending regulations, which amends regulation 151 of the Building Regulations 2018
BCA Volume One
Performance requirement B1P1
Regulation 12(b) of the amending regulations, which amends regulation 151 of the Building Regulations 2018
BCA Volume Two
Performance requirement H1P1
Regulation 13(1) of the amending regulations, which amends regulation 152(2) of the Building Regulations 2018
BCA Volume One
Schedule 1
Regulation 13(2) of the amending regulations, which amends regulation 152(3) of the Building Regulations 2018
BCA Volume Two
Schedule 1
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Regulation 15(1) of the amending regulations, which amends regulation 164(1) of the Building Regulations 2018
BCA Volume One
Schedule 1
Regulation 15(2) of the amending regulations, which amends regulation 164(2)(a) of the Building Regulations 2018
BCA Volume Two
Schedule 1
Regulation 15(3) of the amending regulations, which amends regulation 164(2)(b) of the Building Regulations 2018
BCA Volume Two
Clause H7O1(f)
Regulation 15(4) of the amending regulations, which amends regulation 164(2)(c) of the Building Regulations 2018
BCA Volume Two
Performance requirement H7P6(e)
Regulation 15(5) of the amending regulations, which amends regulation 164(2)(d) of the Building Regulations 2018
BCA Volume Two
Performance requirement H7P6
Regulation 16 of the amending regulations, which amends regulation 165 of the Building Regulations 2018
BCA Volume Two
Performance requirement H7P6
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Regulation 17 of the amending regulations, which substitutes regulation 166F(1)(a)(i) of the Building Regulations 2018
BCA Volume Two
Performance requirements H1P1, H1P2, H2P2, H2P3, H3P1, H3P2, H4P1, H4P3 and H7P3
Regulation 18 of the amending regulations, which amends regulation 235 of the Building Regulations 2018
BCA Volume Two
Performance requirement H3P1
Regulation 19(1) of the amending regulations, which amends regulation 236(4)(b) of the Building Regulations 2018
BCA Volume One
Clause E3D8
Regulation 19(2) of the amending regulations, which amends regulation 236(4)(c) of the Building Regulations 2018
BCA Volume One
Clauses F4D5(c) and F4D5(e)
Regulation 19(3) of the amending regulations, which amends the definition of access provision in regulation 236(5) of the Building Regulations 2018
BCA Volume One
Part F4
Regulation 20(1) of the amending regulations, which amends regulation 237(1) and (2) of the Building Regulations 2018
BCA Volume One
Schedule 1
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Regulation 20(2)(a) of the amending regulations, which amends regulation 237(3) of the Building Regulations 2018
BCA Volume One
Clause A6G7
Regulation 21(1) of the amending regulations, which amends regulation 240(1) of the Building Regulations 2018
BCA Volume One
Schedule 1
Regulation 21(2) of the amending regulations, which amends regulation 240(2) of the Building Regulations 2018
BCA Volume Two
Schedule 1
Regulation 22 of the amending regulations, which amends item 5 in the Table in Schedule 3 to the Building Regulations 2018
BCA Volume One
BCA Volume Two
Clauses A6G2, A6G3, A6G4, A6G5, A6G6, A6G7, A6G8, A6G9, A6G10 and A6G11
Regulation 23 of the amending regulations, which substitutes part of Form 2 in Schedule 4 to the Building Regulations 2018
BCA Volume Two
Clauses H8D2(2) and H8P1(a)
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Regulation 24(1) of the amending regulations, which substitutes the definition of AS/NZS 3500.1 in regulation 5 of the Plumbing Regulations 2018
AS/NZS 3500.1 Plumbing and Drainage Part 1: Water services. published jointly by Standards Australia and Standards New Zealand on 28 May 2021 and amended on 27 May 2022
The whole
Regulation 24(2) of the amending regulations, which substitutes the definition of AS/NZS 3500.2 in regulation 5 of the Plumbing Regulations 2018
AS/NZS 3500.2 Plumbing and Drainage Part 2: Sanitary plumbing and drainage, published jointly by Standards Australia and Standards New Zealand on 28 May 2021 and amended in October 2021
The whole
Regulation 26 of the amending regulations, which substitutes regulation 18 of the Plumbing Regulations 2018
PCA
Part B4
Regulation 27 of the amending regulations, which substitutes regulation 22 of the Plumbing Regulations 2018
PCA
Victorian variation VIC Part E2
Regulation 28 of the amending regulations, which substitutes regulation 24 of the Plumbing Regulations 2018
PCA
Victorian variation VIC Part E2
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Regulation 29 of the amending regulations, which substitutes regulation 26 of the Plumbing Regulations 2018
PCA
Victorian variation VIC Part E3
Regulation 31 of the amending regulations, which substitutes clause 5 of Schedule 2 to the Plumbing Regulations 2018
SAA/SNZ HB 114 Guidelines for the design of eaves and box gutters, published by Standards Australia on 5 November 1998
The whole
Regulation 32 of the amending regulations, which substitutes the note at the foot of clause 8 of Schedule 2 to the Plumbing Regulations 2018
Volume Two of the National Construction Code 2019
The Victorian variation to the energy efficiency provisions of Parts 2.6 and 3.12 in Volume Two of the National Construction Code 2019
Regulation 33 of the amending regulations, which substitutes the note at the foot of clause 11 of Schedule 2 to the Plumbing Regulations 2018
Volume Two of the National Construction Code 2019
The Victorian variation to the energy efficiency provisions in Parts 2.6 and 3.12 of Volume Two of the National Construction Code 2019
Regulation 34 of the amending regulations, which amends clause 12(2) of Schedule 2 to the Plumbing Regulations 2018
PCA
Clause VIC B1D3(3)
——
Table of Applied, Adopted or Incorporated Matter
The following table of applied, adopted or incorporated matter was included in S.R. No. 122/2023 in accordance with the requirements of regulation 5 of the Subordinate Legislation Regulations 2014.
In this table—
amending regulations means the Building and Plumbing Amendment (Solar Water Heaters and Other Matters) Regulations 2023;
BCA Volume One means Volume One of the National Construction Code 2022 including any Victorian variations or additions set out in Schedule 10 to that Volume;
BCA Volume Two means Volume Two of the National Construction Code 2022 including any Victorian variations or additions set out in Schedule 10 to that Volume;
BCA Volume Two 2019 means Volume Two of the National Construction Code 2019 including any Victorian variations or additions set out in Schedule 1 to that Volume;
National Construction Code 2019 means the National Construction Code 2019 published by the Australian Building Codes Board in February 2019 and as amended on 1 July 2020;
National Construction Code 2022 means the National Construction Code 2022 published by the Australian Building Codes Board on 1 May 2023;
PCA means the Plumbing Code of Australia set out in Volume Three of the National Construction Code 2022, including any Victorian variations or additions set out in Schedule 10 to that Volume.
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Regulation 4 of the amending regulations, which amends regulation 10A of the Building Regulations 2018
BCA Volume One
Performance requirement B1P1, deemed-to-satisfy clause B1D3 and Part G7 as modified by regulation 10A of the Building Regulations 2018
Statutory rule provision
Title of applied, adopted or incorporated document
Matter in applied, adopted or incorporated document
Regulation 5 of the amending regulations, which amends Form 2 in Schedule 4 to the Building Regulations 2018
BCA Volume Two
Clauses H8P1(a) and H8D2(2)
Regulation 6(1) of the amending regulations, which inserts new definition of AS 1851 into regulation 5 of the Plumbing Regulations 2018
AS 1851—2012 Routine service of fire protection systems and equipment, published by Standards Australia on 3 December 2012, as amended on 16 November 2016
The whole
Regulation 7(2) of the amending regulations, which amends regulation 9 of the Plumbing Regulations 2018
PCA
Clauses VIC B6D2 and VIC B7D4
Regulation 8 of the amending regulations, which inserts new Part 8A into the Plumbing Regulations 2018
BCA Volume Two 2019
Victorian variations to performance requirement P2.6.1 and clauses V2.6.1 and 3.12.0
↑